|
ISTOTROPIC
FILM
This
IT type polyester film is a transparent film. This film
shows excellent isotropic characteristics, that is, high and balanced
mechanical properties and low thermal shrinkage in all directions.
The film is best suited for lidding application. This film is also
available with corona or chemical treatment on one side.
ITCI
- corona wound–in
ITCO - corona wound-out
IT
LI - chemical wound–in
IT LO - chemical wound-out
|
TECHNICAL
DATA
Type
- I T
|
| PROPERTY |
TEST
METHOD
|
UNIT |
NOMINAL
VALUE |
| PHYSICAL |
|
|
|
| Yield |
Internal |
micron
|
12 |
| Thickness |
Internal |
m2/kg |
59.5 |
| Tensile
Strength at Break MD / TD |
ASTM-D-882 |
kg/cm2 |
1900
/ 2200 |
| +
45 o / - 45 o |
|
|
2500
/ 2200 |
| Ratio
+ 45 o / - 45 o |
|
|
0.6
- 1.4 |
| Elongation
at Break MD / TD |
ASTM-D-882 |
% |
100
/ 90 |
| +
45 o / - 45 o |
|
|
100
/ 90 |
|
Ratio + 45 o / - 45 o |
|
|
0.6
- 1.4 |
| Ratio
T.S. + 45 o / Elongation + 45 o |
- |
|
<
0.35 |
| T.S.
- 45 o / Elongation - 45 o |
|
|
<
0.35 |
| Co-efficient
of Friction Static |
ASTM-D-1894 |
|
0.50 |
|
Kinetic |
|
|
0.45 |
| Surface
Tension -- Corona Treated |
ASTM-D-2578 |
Dyne/cm |
50 |
|
-- Chemical Treated |
|
|
56 |
| OPTICAL |
|
|
|
| Haze |
ASTM-D-1003 |
% |
4.0 |
| Transmittance |
ASTM-D-1003 |
% |
85
|
| THERMAL |
|
|
|
| Shrinkage
at 150 o C/30 MD |
ASTM-D-1204 |
|
<
1.5 |
| minutes TD |
|
|
<
1.0 |
| BARRIER
PROPERTIES |
|
|
|
| MVTR
(380C/ 90% RH/ 24 hrs) |
ASTM-F-372 |
g/m2 |
45 |
| O2R (250C/
75% RH/ 24 hrs/ 1Atm.) |
ASTM-D-1434 |
cc/m2 |
110 |
| |
|
|
|
MD--
Machine Direction ; TD–Transverse Direction
FDA
Status : This UmaPET polyester film complies with U.S. Food and
Drug Administration food additive regulation 21 CFR 177.1630, sections
(f) and (g).
UmaPETÒis
the registered trademark for Ester Industries’ bi-axially oriented
polyester films based on polyethylene terephthalate
The
information contained herein is to be used only as a guide for using
UmaPET film. The specifications and characteristics mentioned are
based on reliable test procedures. Users of this film should make
independent assessment of its suitability to their end use. Ester
Industries does not offer any guarantee on the results and does
not accept any liability arising out of the use of the information
contained herein.
|
