|
HOT
STAMPING FILM
This
ST type polyester film is a non-treated film possessing high clarity,
high gloss and excellent surface characteristics. The film has good
dimensional stability at high temperatures. It has high resistance
to neck-in or creasing at high temperature and high tension coating
operation. The film has excellent processability and is suitable
for stamping foil applications.
|
TECHNICAL
DATA
Type
-- ST
|
| PROPERTY
|
TEST
METHOD |
UNIT
|
NOMINAL
VALUE |
| PHYSICAL
|
|
|
|
| Thickness
|
Internal
|
micron
|
12
|
| Yield
|
Internal
|
m2/kg
|
59.5
|
| Tensile
Strength at Break |
MD |
| |
TD
|
|
ASTM-D-882
|
kg/cm2
|
1900
1875 |
| Elongation
at Break |
MD |
| |
TD
|
|
ASTM-D-882
|
%
|
95
90 |
| Co-efficient
of Friction |
Static
|
| |
Kinetic
|
|
ASTM-D-1894
|
- |
0.50
0.45 |
| OPTICAL
|
|
|
|
| Haze
|
ASTM-D-1003
|
%
|
3.3 |
| Transmittance
|
ASTM-D-1003
|
%
|
85
|
| THERMAL
|
|
|
|
| Shrinkage
at 190 o C/20 |
MD |
| minutes |
TD |
|
ASTM-D-1204
|
% |
4.0
0.2
|
MD-
Machine Direction ; TD – Transverse Direction
UmaPETÒis
the registered trademark for Ester Industries’ polyester films based
on bi-axially oriented polyethylene terephthalate
The
information contained herein is to be used only as a guide for using
UmaPET film. The specifications and characteristics mentioned are
based on reliable test procedures. Users of this film should make
independent assessment of its suitability to their end use. Ester
Industries does not offer any guarantee on the results and does
not accept any liability arising out of the use of the information
contained herein.
|
