|
ANTI-STATIC
FILM
This
SI / SO type is a transparent film having anti-static treatment
on one side. The film possesses good clarity, very low static charge
and good frictional characteristics and is suitable for flexible
packaging, printing and lamination applications. This film is specially
designed for applications where very low static charge is required
at outer surface of laminate to smoothly carry out the operations
like pouch–filling.
|
TECHNICAL DATA
Type -- S I (coated side wound-in )
-- SO (coated side wound-out)
|
| PROPERTY
|
TEST
METHOD |
UNIT
|
NOMINAL
VALUE |
| PHYSICAL
|
|
|
|
| Thickness
|
Internal
|
micron
|
12
|
| Yield
|
Internal
|
m2/kg
|
59.5
|
| Tensile
Strength at Break |
MD |
| |
TD
|
|
ASTM-D-882
|
kg/cm2
|
1900
2200 |
| Elongation
at Break |
MD |
| |
TD
|
|
ASTM-D-882
|
%
|
110
85 |
| Co-efficient
of Friction |
Static
|
| |
Kinetic
|
|
ASTM-D-1894
|
- |
0.40
0.35 |
| Ash
Pick up Test (Qualitative) |
Internal
Method |
No
pick up of ash |
Excellent
|
| OPTICAL
|
|
|
|
| Haze
|
ASTM-D-1003
|
%
|
4.0 |
| Transmittance
|
ASTM-D-1003
|
%
|
85
|
| THERMAL
|
|
|
|
| Shrinkage
at 150 o C/30 |
MD |
| minutes |
TD |
|
ASTM-D-1204
|
% |
2.5
1.0
|
MD-- Machine Direction ; TD–Transverse Direction
UmaPET is the registered trademark for Ester Industries’
bi-axially oriented polyester films based on polyethylene terephthalate
The information contained herein is to be used only as a guide for
using UmaPET film. The specifications and characteristics mentioned
are based on reliable test procedures. Users of this film should
make independent assessment of its suitability to their end use.
Ester Industries does not offer any guarantee on the results and
does not accept any liability arising out of the use of the information
contained herein.
|
